Creating a Layout 29.1

1. Choose the Layout1 TAB at the bottom of the screen.

2. Change the name of the layout using the Layout Wizard

Advertising

3. Change the remaining Layout options for page setup and plots.


Paper Space Layout with One View and Inserted Title Block

Creating Mulitple Layouts 29.2

1. Choose the Layout2 TAB at the bottom of the screen.

2. Change the name of the layout.

3. Change the remaining Layout options for page setup and plots.


Mview Command 29.3

• The MVIEW command controls the size and position of the mview viewports (from now on called mviews). Mview is to tilemode = 0 as vports is to tilemode = 1.

• Use mview when you would like to see a view of the model.

• Pspace mode must be active to use mview. AutoCAD will automatically switch to pspace when you issue the mview command.

• The default mview option is "<<first point>>" To use this option, pick a point which represents one corner of the mview. At the "other corner" prompt, pick a point which represents the opposite corner of the mview.

1. Choose View, Viewports,1 Viewport.

or

Advertising

2. Type Type MVIEW at the command prompt. Command: MVIEW or MV ON/OFF/Hideplot/Fit/2/3/4/Restore/<<First Point>>: P1 Other corner: P2


TIP: Mviews should be created on their own layers in order to be turned ON/OFF

Back